Lead Process & Process Safety Engineer PT. BAKRIE CONSTRUCTION
PT. BAKRIE CONSTRUCTION
Head Office
Address : Komplek Rasuna Epicentrum Bakrie Tower Lantai 35 Jakarta - Indonesia.
Workshop / Yard
Address : Desa Sumuranja, Kecamatan Pulo Ampel, Banten - Indonesia
Postcode : 42456
Lead Process & Process Safety Engineer
FullTime
IDR 4.500.000– IDR 15.000.000 /month
4 days ago
Kualifikasi:
- Minimum Bachelor’s Degree (S1) in Chemical Engineering, Petroleum Engineering, Mechanical Engineering, Environmental Engineering, Science, or a related discipline from an accredited university.
- Minimum 10 years of professional working experience in engineering execution, preferably within the Oil & Gas, Petrochemical, Power Plant, or major Energy infrastructure sectors.
- Certifications: Certified General Occupational Safety and Health Expert (Ahli K3 Umum / AK3U Kemnaker RI) or Process Safety Management Specialist certification is highly preferred. Certified HAZOP Chairman / Leader credential from a recognized international body (such as IChemE or TUV Nord) is a distinct advantage. Professional Engineer certification (Insinyur Profesional / IPU/IPM from PII) or Chartered Engineer (CEng) status is disukai. Certifications in SIL Verification, Quantitative Risk Assessment (QRA), or NFPA Fire Protection Engineering are strong added advantages.
- Lead Process & Process Safety Engineer(code:LPPSE526).
- Please write name Code, proposed position at the subject. for example:Project Control (code:PC005).
- Disclaimer : PT. Midiatama tidak terafiliasi apapun dengan perusahaan yang tertampil di karir ini, kami hanya menyediakan informasi lowongan kerja yang mungkin bisa membantu untuk alumni midiatama atau untuk umum. Beberapa poin kualifikasi telah ditambahkan/disesuaikan untuk memberikan gambaran peran yang lebih jelas. Untuk informasi mutlak mengenai posisi ini, silakan hubungi kontak resmi/sumber asli tertera dan bila perusahaan atau personal yang keberatan terkait tertampil nya loker anda bisa langsung Hubungi Admin Kami.
Tugas & Tanggung Jawab
- Leads, directs, and approves all engineering deliverables, process calculations, hydraulic simulations, and safety flowsheets across EPC project life cycles.
- Facilitates, leads, and documents formal Process Safety Management (PSM) workshops, including HAZOP, HAZID, LOPA, Bow-Tie Analysis, and SIL classification/verification sessions.
- Oversees process safety studies, flare header sizing, pressure relief valve (PRV) design, blowdown calculations, and overpressure protection systems to ensure total facility integrity.
- Evaluates, verifies, and audits Quantitative Risk Assessments (QRA), Fire and Gas Mapping (FGM), dispersion modeling, and thermal radiation analyses for high-hazard process units.
- Reviews, approves, and signs off on engineering drawings, Process Flow Diagrams (PFD), Piping and Instrumentation Diagrams (P&ID), Cause and Effect matrices, and Process Safety Data Sheets (PSDS).
- Collaborates with client safety leads, project management teams, and vendor specialists to ensure full compliance with national regulatory mandates, API standards, and NFPA codes.
- Leads technical investigations into process design deviations, high-pressure trip events, or near-misses during commissioning using Root Cause Analysis (RCA), implementing robust Corrective and Preventive Actions (CAPA).
- Mentors junior and senior process engineers, manages engineering schedule deliverables, oversees technical vendor bid evaluations, and presents safety design reviews to client boards.
Harus punya keterampilan:
- Hard Skills: EPC process design engineering, HAZOP/HAZID/LOPA leadership, SIL classification & verification, pressure relief valve (PRV) & flare network sizing, dispersion & QRA modeling, P&ID/PFD verification, API & NFPA compliance, and technical safety reporting.
- Soft Skills: Visionary engineering leadership, assertive technical authority, strategic problem-solving under tight EPC schedules, high-level client negotiation, effective English communication, and cross-functional team management.
